Features:
- Wireless Vibration Alarm triggered by movement, ideal for Bikes, Motorcycles, Vehicles, Doors, Windows, or any valuable item you wish to protect, effectively deterring thieves with a powerful 110dB alarm.
- Vibration alarm with remote control, featuring 4 modes: Arm/Disarm/Panic/Doorbell for convenient control at a remote range of up to 25M.
- Easily adjust sensitivity levels from a gentle touch to a stronger impact, tailored to your specific requirements.
- Low-power consumption battery ensures extended usage, allowing the bike alarm system to remain on standby for over one year (based on five on/off cycles daily).
- Simple installation via double-sided adhesive or straps for hassle-free setup.
- Detects gentle touches, pushes or impacts through wireless vibration alerts with a remote.
Specifications:
- Package Size: 4.2*2.5*1.5 inch
- Package Weight: 71g
- Remote control range up to 25M
- 10 levels of adjustable sensitivity
- Low-consumption design for extended battery life (requires two AAA batteries, not included)
- Remote control operates with a 12V/27A alkaline battery (included)
- 4 Modes: Arm/Disarm/Panic/Doorbell
- Doubles as a Doorbell; in doorbell mode, the vibration alarm detects movement and produces a “Dingdong” sound.
- Low battery warning
Remote Control 4 Modes:
- Arm key: Activates a 110db alarm when triggered.
- Disarm key: Stops the alarm or disarms the system.
- SOS key: Sounds a 110db alarm as an emergency signal, even if the alarm is not triggered.
- Doorbell key: Produces a “dingdong” sound when triggered, alerting you to someone’s presence.
Please Note:
- It is advisable to install the vibration alarm in a location protected from rain and direct sunlight, such as under the bicycle seat or within a plastic bag.
- The internal vibration sensor is oriented horizontally for optimal performance; it is recommended to install it in the same direction for the best results.
Remote Control Door/Window Sensor Alarm With 110dB Loud. Anti-theft Alarm, More Safety At Home.
The security system will automatically trigger a warning when the door is opened or experiences vibrations.
Locate your bike/car swiftly.
To customize sensitivity levels, follow these steps:
Begin with the factory default, which is the highest sensitivity (level one).
Press and hold the Disarm key on the remote control (ignore the prompt tone). The remote control’s LED will turn off for approximately 3 seconds, then light up again after 3 seconds. Release the Disarm key and press the doorbell key to adjust the sensitivity level.
At the highest sensitivity level, the alarm will produce a long “Bi……” sound. Press the doorbell key once to decrease the sensitivity level, and the alarm will produce a shorter “Bi……” sound. When you reach the tenth level, pressing it again will return you to the first level. Remember, higher levels indicate lower sensitivity.
Mleh but must change shipping company ems is too bad
Good quality
as described and came on time to Bulgaria.
As for the product design and quality – it is very loud, but if you gona keep it inside the scooter (as i wanted to do, I put it next to the battery of the scooter, so that is not in the open and s1 to just remove the batteries) it is significantly less loud